|  |

| |

Enabling better global research outcomes in soil, plant & environmental monitoring.

DBS60 SDI-12 Band Dendrometer

The DBS60 is an SDI-12 Band Dendrometer designed to measure short- and long-term changes in stem circumference.

The DBS60 SDI-12 Band Dendrometer is similar to the DBL60, but has a cable for the connection to a SDI-12 Data Logger.

Outputs:
Change in Tree Circumference (mm)
Temperature (°C)

Increment sensors type
rotary position
Range 64 mm of circumference
Linearity
2% of full scale
Resolution
step-less
Tape strength
15 to 20 N in the whole range, stem diameter independent
Tape temperature coefficient:
17.3 x 16 per °C
Operating range:
   – Temperature
-30 to 60°C
   – Humidity 0 to 100%
Size 100 x 70 x 100 mm
Weight
ca 260 g
Minimal stem diameter
8 cm
Increment range
65mm
Tightening strength 15 to 20 N
The DBS60 Band Dendrometer is used to measure short and long term changes in stem circumference, designed for stems with a diameter greater than 8cm. The DBS60 is highly accurate, with a measurement resolution of 1µm (0.001 mm). The DBS60 is IP-65 rated and is designed to measure stem changes over many years.
The DBS60 is a non-invasive measurement device attached to the stem with an inextensible stainless steel band. The stainless steel band has a linear thermal co-efficient of 17.3 x 16 per °C. Therefore thermal variations caused by daily or seasonal changes in temperature have no measurable impact on the operation of the DBS60.
  • ICT SDI-12 Logger
    The SDI-12 Logger from ICT International is a rugged, self-contained, standalone logger designed to collect data from SDI-12 sensors. The SDI-12 Logger is able to receive up to 250 parameters from a maximum of 30 individual sensors.
  • ICT Universal Telemetry Hub
    ICT Universal Telemetry Hub